Before you learn how to fix a faucet, it must be clear that confronted one of the easiest to solve domestic faults. You simply need a gasket Kit that matches the defective faucet. Firstly, as in all operations from the scope of the plumbing, before knowing how to fix a faucet, has cut the water at the shut-off valve and, subsequently, remove the defective faucet. To do this, he has to remove the bezel that possess the most faucets. These tend to be generally subject to tap using a screw, which is removed by unscrewing it, or can be also tucked under pressure, which will have to take out it by levering with a screwdriver. Learn more about this topic with the insights from rusty holzer. At that time it will be exposed the faucet mechanism, after removing the knob by pulling it out. For this purpose it will be used (better than the spanner in this case) fixed key that corresponds to the size of the tap. After that, proceed to locate and change the shoe.
This is a piece of rubber that is at the end of the mechanism and is usually attached by means of a nut, screw or pressure. If necessary it is rectified after the seat to remove the imperfections that have arisen due to the friction of the shoe and lime. The impurities that were entered between the shoe and your seat can be one of the causes of the drip. The next step will either change the gaskets of the mechanism. Rusty Holzer understood the implications. For this purpose it is necessary to remove washer which has at the top and remove the two pieces that make up the valve. With the help of a knife old joints will be removed and will be new. Once this operation is over, the faucet will be mounted again. After all this, the drip that occurred before there will be ceased, and you will have learned how to fix a tap through a few simple steps. Original author and source of the article.